| Tilt-Lock LS1 Pneumatic Tip Lift The Tilt Lock Model LS1 Tip Lift is designed to handle rolls of paper up to 1,250 pounds. The LS1 model utilizes handle mounted controls combining hoist and tip lift functions at the operators finger tips. The controls also integrate an interlock feature that requires the operator to have both hands in the correct position on the controls preventing accidental hand placement. This unit is perfect for handling rolls in areas with low headroom. The Model LS1 weighs 140 pounds. Tip Lift power requirement is 115-1-60 and 90 psi. Minimum 3" wide roll is required for probes to work properly. Tip Lift is supplied with a quick release pin for interchanging probes to accommodate 3" to 12" diameter cores. Tilt-lock recommends using electric chain hoists with 115-1-60 power supply and a lifting speed of 16 fpm. |
 |
| Tilt-Lock L1 Pneumatic Tip Lift The Tilt Lock Model L1 Tip Lift is designed to handle rolls of paper up to 1,260 pounds. The L1 model utilizes handle mounted controls combining hoist and tip lift functions at the operators finger tips. The controls also integrate an interlock feature that requires the operator to have both hands in the correct position on the controls preventing accidental hand placement. The Model L1 weighs 150 pounds. Tip Lift power requirement is 115-1-60 and 90 psi. Minimum 3" wide roll is required for probes to work properly. Tip Lift is supplied with a quick release pin for interchanging probes to accommodate 3" to 12" diameter cores. Tilt-lock recommends using electric chain hoists with 115-1-60 power supply and a lifting speed of 16 fpm. |
|
| Tilt-Lock L2 Pneumatic Tip Lift The Tilt Lock Model L2 Tip Lift is designed to handle rolls of paper up to 2,000 pounds. The L2 model utilizes handle mounted controls combining hoist and tip lift functions at the operators finger tips. The controls also integrate an interlock feature that requires the operator to have both hands in the correct position on the controls preventing accidental hand placement. The Model L2 weighs 185 pounds. Tip Lift power requirement is 115-1-60 and 90 psi. Minimum 3" wide roll is required for probes to work properly. Tip Lift is supplied with a quick release pin for interchanging probes to accommodate 3" to 12" diameter cores. Tilt-lock recommends using electric chain hoists with 115-1-60 power supply and a lifting speed of 16 fpm. |
 |
| Tilt-Lock L3 Pneumatic Tip Lift The Tilt Lock Model L3 Tip Lift is designed to handle rolls of paper up to 2,000 pounds. The L3 model utilizes handle mounted controls combining hoist and tip lift functions at the operators finger tips. The controls also integrate an interlock feature that requires the operator to have both hands in the correct position on the controls preventing accidental hand placement. The Model L3 weighs 200 pounds. Tip Lift power requirement is 115-1-60 and 90 psi. Minimum 3" wide roll is required for probes to work properly. Tip Lift is supplied with a quick release pin for interchanging probes to accommodate 3" to 12" diameter cores. Tilt-lock recommends using electric chain hoists with 115-1-60 power supply and a lifting speed of 16 fpm. |
|
