Tool Cooling System

PRODUCT OVERVIEW

All Metal Parts, Stainless Steel Body, Quiet – Under 70dBA, Tests Show Frigid-X Constantly Quieter Than Competition!

Frigid-X™ Tool Cooling System for dry machining applications – replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.

Produces cold air at approximately 50º F (28º C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.

Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.

tool_cooling_for_grinding-300x247

lathe_machining-300x221

Model 57015FS Model 57015FD
Tool Cooling System - Frigid-X™ Tool Cooling System - Frigid-X™
Includes: Tool Cooler, Single Point Hose Kit, 3/8″
(10mm) Cone Nozzle, 1 1/4″ (32mm) Fan Nozzle,
Filter With Manual Drain
Includes: Tool Cooler, Dual Point Hose Kit, Two (2) 1/4″ (6mm) Cone Nozzle, 1″ (25.4mm) Fan Nozzle, Filter With Manual Drain
Model 57025FS, 57030FS, 57040FS Model 57025FD, 57030FD, 57040FD
Tool Cooling System - Frigid-X™ Tool Cooling System - Frigid-X™
Includes: Tool Cooler, Single Point Hose Kit, 3/8″ (10mm) Cone Nozzle, 1 1/4″ (32mm) Fan Nozzle, Filter With Automatic Drain Includes: Tool Cooler, Dual Point Hose Kit, Two (2) 1/4″ (6mm) Cone Nozzle, 1″ (25.4mm) Fan Nozzle, Filter With Automatic Drain

APPLICATIONS

  • Solid Carbide End Mills
  • Wherever lubrication is required in machining
  • When cooling is required beyond the capability of cold air alone

ADVANTAGES

  • No electricity required – simplicity in design
  • Low Cost
  • Reduces coolant / lubricant cost by using less fluid
  • Improves safety with less mist
  • No moving parts except for an adjusting screw for the fluid
  • Small and lightweight – portable
  • Maintenance free operation

VIDEOS

tool_cooler_5

+ Overview

PRODUCT OVERVIEW

All Metal Parts, Stainless Steel Body, Quiet – Under 70dBA, Tests Show Frigid-X Constantly Quieter Than Competition!

Frigid-X™ Tool Cooling System for dry machining applications – replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.

Produces cold air at approximately 50º F (28º C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.

Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.

tool_cooling_for_grinding-300x247

lathe_machining-300x221

Model 57015FS Model 57015FD
Tool Cooling System - Frigid-X™ Tool Cooling System - Frigid-X™
Includes: Tool Cooler, Single Point Hose Kit, 3/8″
(10mm) Cone Nozzle, 1 1/4″ (32mm) Fan Nozzle,
Filter With Manual Drain
Includes: Tool Cooler, Dual Point Hose Kit, Two (2) 1/4″ (6mm) Cone Nozzle, 1″ (25.4mm) Fan Nozzle, Filter With Manual Drain
Model 57025FS, 57030FS, 57040FS Model 57025FD, 57030FD, 57040FD
Tool Cooling System - Frigid-X™ Tool Cooling System - Frigid-X™
Includes: Tool Cooler, Single Point Hose Kit, 3/8″ (10mm) Cone Nozzle, 1 1/4″ (32mm) Fan Nozzle, Filter With Automatic Drain Includes: Tool Cooler, Dual Point Hose Kit, Two (2) 1/4″ (6mm) Cone Nozzle, 1″ (25.4mm) Fan Nozzle, Filter With Automatic Drain
+ Features

APPLICATIONS

  • Solid Carbide End Mills
  • Wherever lubrication is required in machining
  • When cooling is required beyond the capability of cold air alone

ADVANTAGES

  • No electricity required – simplicity in design
  • Low Cost
  • Reduces coolant / lubricant cost by using less fluid
  • Improves safety with less mist
  • No moving parts except for an adjusting screw for the fluid
  • Small and lightweight – portable
  • Maintenance free operation
+ Videos

VIDEOS

+ Dimensions

tool_cooler_5

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt