Mechanical Thermostat And Solenoid Valve Kit

PRODUCT OVERVIEW

Cabinet Panel Cooler Accessories are available with a standard two-way normally closed solenoid valve and thermostat kit Model 90015 (120V) or Model 90016 (240V). This limits the flow of air only when required. The thermostat is factory set at 95ºF (35ºC) and will normally hold +/- 2ºF (1ºC) inside the enclosure. It is rated 24V-240V, 50/60Hz. Ul recognized and CSA approved.

Thermostat And Solenoid Valve Kit

This kit comes complete with a solenoid valve, thermostat, and a resistor. The resistor is included should you encounter rapid temperature fluctuations in the control panel causing the solenoid to cycle on and off to quickly (chattering). The resistor is installed (if needed) across the leads of the thermostat and prevents chattering by dampening the thermo switch sensitivity.

+ Overview

PRODUCT OVERVIEW

Cabinet Panel Cooler Accessories are available with a standard two-way normally closed solenoid valve and thermostat kit Model 90015 (120V) or Model 90016 (240V). This limits the flow of air only when required. The thermostat is factory set at 95ºF (35ºC) and will normally hold +/- 2ºF (1ºC) inside the enclosure. It is rated 24V-240V, 50/60Hz. Ul recognized and CSA approved.

Thermostat And Solenoid Valve Kit

This kit comes complete with a solenoid valve, thermostat, and a resistor. The resistor is included should you encounter rapid temperature fluctuations in the control panel causing the solenoid to cycle on and off to quickly (chattering). The resistor is installed (if needed) across the leads of the thermostat and prevents chattering by dampening the thermo switch sensitivity.

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt