Air Jets

PRODUCT OVERVIEW

Nex Flow Air Jets

Superior designed Air Jets reduce compressed air consumption and noise levels while maintaining laminar flow for strong blowoff. Air Jets entrain large volumes of surrounding air through the Jet (similar to Air Amplifiers) and are more efficient than Air Nozzles. They cover a larger blowoff target than a Nozzle and ideal especially for part ejection.

All Nex Flow™ Air Jets meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically reduced with Air Jets in addition to lower energy use.

The Nex Flow™ High Force Air Jet is also a High Velocity Air Jet. All the air jets are adjustable. With an Adjustable Air Jet the flow and force can be set and “locked” in place with the lock ring for your particular application.

From Left to right is the High Flow Air Jet (Model 45001) the High Force Air Jet (Model 45002) and the Mini Air Jet (Model 45003)

Model 45001/45002 – High Flow Air Jet and High Force Air Jet are physically the same size. The only difference is a larger exit opening in the High Flow version for the amplified air flow. The high flow system is used more for cooling and light blow-off while the high force version is used mainly for heavier blow-off applications.

Model 45002B – High Force Air Jet in brass. The gap can be set and locked into place. The gap setting value is marked on the air jet body for accurate setting. Ideal for heavy blow-off applications

Model 45002S – High Force Air Jet in 316L Stainless Steel. The gap can be set and locked into place. The gap setting value is marked on the air jet body for accurate setting. Ideal for high temperature and for food service heavy blow-off applications.

Model 45003 – Mini Air Jet is the most compact air jet with high force, is adjustable and ideal for tight spaces. This is unique to Nex Flow™ and there is no equivalent competitive system.

Model 45004 – Fat Air Jet Air Amplifier is the largest flat jet/smallest air amplifier with the same design as the high performance air jets to give you the most optimal performance with an adjustable gap and lock ring to set the gap in place.

APPLICATIONS

  • Part cleaning
  • Chip removal
  • Part drying
  • Part ejection
  • Air assist

ADVANTAGES

  • Reduced compressed air cost
  • 10 dBA average noise reduction
  • Conserve compressed air
  • Compact
  • Improved safety
  • Meets OSHA noise level requirements
  • Improved production

VIDEOS

Air Jets – How They Work

 Model 45001, 45002 and 45003 Air Jets use a small amount of compressed air entering the annular chamber and exiting via a small ring nozzle at high speed over a “Coanda” profile. This creates a vacuum entraining outside air converting the pressure to a high flow output while maintaining a high blowoff force. Energy costs and noise levels are reduced as a result.

PERFORMANCE

PRESSURE in PSIG (BAR)
40 (2.8) 60 (4.1) 80 (5.5) 100 (6.9) 120 (8.4)
MODEL 45001
(.008″ gap setting)
Force at 12″ from Target
FORCE
oz (grams)
6 (170) 12 (340) 19.5 (583) 27.5 (780) 36 (1021)
FLOW
SCFM (SLPM)
15 (425) 21 (595) 26 (736) 32 (906) 36.5 (1034)
PRESSURE in PSIG (BAR)
40 (2.8) 60 (4.1) 80 (5.5) 100 (6.9) 120 (8.4)
MODEL 45001
MODEL 45002 
MODEL 45002B 
MODEL 45002S 
(.008″ gap setting) 
Force at 12″ from Target
FORCE
oz (grams)
11 (312) 19 (539) 27 (766) 35 (992) 43 (1219)
FLOW
SCFM (SLPM)
16 (453) 22 (623) 26.5 (750) 31 (878) 35 (991)
PRESSURE in PSIG (BAR)
40 (2.8) 60 (4.1) 80 (5.5) 100 (6.9) 120 (8.4)
MODEL 45003
(.008″ gap setting)
Force at 12″ from Target
FORCE
oz (grams)
9 (255) 16 (454) 22 (624) 28 (794) 34 (964)
FLOW
SCFM (SLPM)
11.5 (326) 16 (453) 19 (538) 21.5 (609) 24 (680)
Model
Air Consuption @ 80 psig at .008” gap exc
Force in ounces at 6” from target
Force in grams at 6” from target
45001 – High Flow Air Jet at .008” gap setting 14.7 9.0 255
45002 – High Force Air Jet at .008” gap setting 18.7 13.5 383
45002B -High Force Air Jet (Brass with gap marked) at .008” gap setting 18.7 13.5 383
45002S –High Force air jet (316L Stainless Steelwith gap marked) 18.7 13.5 383
45003 -Mini Air Jet at .008” gap setting 12.8 6.7 190
45004 – Fat Air at .004” gap setting 12.3 11.8 335

DIMENSIONS

+ Overview

PRODUCT OVERVIEW

Nex Flow Air Jets

Superior designed Air Jets reduce compressed air consumption and noise levels while maintaining laminar flow for strong blowoff. Air Jets entrain large volumes of surrounding air through the Jet (similar to Air Amplifiers) and are more efficient than Air Nozzles. They cover a larger blowoff target than a Nozzle and ideal especially for part ejection.

All Nex Flow™ Air Jets meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically reduced with Air Jets in addition to lower energy use.

The Nex Flow™ High Force Air Jet is also a High Velocity Air Jet. All the air jets are adjustable. With an Adjustable Air Jet the flow and force can be set and “locked” in place with the lock ring for your particular application.

From Left to right is the High Flow Air Jet (Model 45001) the High Force Air Jet (Model 45002) and the Mini Air Jet (Model 45003)

Model 45001/45002 – High Flow Air Jet and High Force Air Jet are physically the same size. The only difference is a larger exit opening in the High Flow version for the amplified air flow. The high flow system is used more for cooling and light blow-off while the high force version is used mainly for heavier blow-off applications.

Model 45002B – High Force Air Jet in brass. The gap can be set and locked into place. The gap setting value is marked on the air jet body for accurate setting. Ideal for heavy blow-off applications

Model 45002S – High Force Air Jet in 316L Stainless Steel. The gap can be set and locked into place. The gap setting value is marked on the air jet body for accurate setting. Ideal for high temperature and for food service heavy blow-off applications.

Model 45003 – Mini Air Jet is the most compact air jet with high force, is adjustable and ideal for tight spaces. This is unique to Nex Flow™ and there is no equivalent competitive system.

Model 45004 – Fat Air Jet Air Amplifier is the largest flat jet/smallest air amplifier with the same design as the high performance air jets to give you the most optimal performance with an adjustable gap and lock ring to set the gap in place.

+ Features

APPLICATIONS

  • Part cleaning
  • Chip removal
  • Part drying
  • Part ejection
  • Air assist

ADVANTAGES

  • Reduced compressed air cost
  • 10 dBA average noise reduction
  • Conserve compressed air
  • Compact
  • Improved safety
  • Meets OSHA noise level requirements
  • Improved production
+ Videos

VIDEOS

Air Jets – How They Work

 Model 45001, 45002 and 45003 Air Jets use a small amount of compressed air entering the annular chamber and exiting via a small ring nozzle at high speed over a “Coanda” profile. This creates a vacuum entraining outside air converting the pressure to a high flow output while maintaining a high blowoff force. Energy costs and noise levels are reduced as a result.
+ Performance

PERFORMANCE

PRESSURE in PSIG (BAR)
40 (2.8) 60 (4.1) 80 (5.5) 100 (6.9) 120 (8.4)
MODEL 45001
(.008″ gap setting)
Force at 12″ from Target
FORCE
oz (grams)
6 (170) 12 (340) 19.5 (583) 27.5 (780) 36 (1021)
FLOW
SCFM (SLPM)
15 (425) 21 (595) 26 (736) 32 (906) 36.5 (1034)
PRESSURE in PSIG (BAR)
40 (2.8) 60 (4.1) 80 (5.5) 100 (6.9) 120 (8.4)
MODEL 45001
MODEL 45002 
MODEL 45002B 
MODEL 45002S 
(.008″ gap setting) 
Force at 12″ from Target
FORCE
oz (grams)
11 (312) 19 (539) 27 (766) 35 (992) 43 (1219)
FLOW
SCFM (SLPM)
16 (453) 22 (623) 26.5 (750) 31 (878) 35 (991)
PRESSURE in PSIG (BAR)
40 (2.8) 60 (4.1) 80 (5.5) 100 (6.9) 120 (8.4)
MODEL 45003
(.008″ gap setting)
Force at 12″ from Target
FORCE
oz (grams)
9 (255) 16 (454) 22 (624) 28 (794) 34 (964)
FLOW
SCFM (SLPM)
11.5 (326) 16 (453) 19 (538) 21.5 (609) 24 (680)
Model
Air Consuption @ 80 psig at .008” gap exc
Force in ounces at 6” from target
Force in grams at 6” from target
45001 – High Flow Air Jet at .008” gap setting 14.7 9.0 255
45002 – High Force Air Jet at .008” gap setting 18.7 13.5 383
45002B -High Force Air Jet (Brass with gap marked) at .008” gap setting 18.7 13.5 383
45002S –High Force air jet (316L Stainless Steelwith gap marked) 18.7 13.5 383
45003 -Mini Air Jet at .008” gap setting 12.8 6.7 190
45004 – Fat Air at .004” gap setting 12.3 11.8 335
+ Dimensions

DIMENSIONS

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt