Heat transfer fluids circulate through process equipment to maintain an even, consistent temperature profile.
Heat transfer fluids from Tech Sales Co., are MultiTherm.
Heat Transfer Flushing Fluid
-
Specially formulated flushing fluid to clean out systems during:
- Start-ups - to remove loose material such as weld splatter, fines, particulate matter, etc. left in lines and equipment, along with oil and some preservative coatings
- General Maintenance - for removing particulate matter and used heat transfer fluid from a system prior to recharge or changeover from one fluid to another. -
Compatible with all MultiTherm and mineral oil heat transfer fluids.
-
Thermal expansion coefficient 0.00047/°F (0.00085/°C)
High Temperature Applications
-
Operating range from 10°F (-12°C) to 600°F (315°C)
-
Food grade (NSF registered, FDA certified Non-Toxic, USDA
-
Chemicallyacceptable, Kosher certified)
-
Low viscosity / Low pour point
-
Non-Toxic, Non-Hazardous, Non-Fouling
-
Designed for applications in Food, Chemical, Plastics, and Die-Casting
-
Thermal expansion coefficient 0.00035/°F (0.00063/°C)
-
For use in closed loop, liquid phase heating and cooling systems to 600°F
-
Operating range from 10°F (-12°C) to 600°F (315°C)
-
Highly refined to have High flash point
-
Oxidation resistance - Very Low vapor pressure
-
Non-Toxic, Non-Hazardous
-
Designed for applications in Asphalt, Chemical, Plastics, Laundries and Die-Casting
-
Thermal expansion coefficient 0.00054/°F (0.00097/°C)
-
For use in closed loop, liquid phase heating systems up to 600°F
-
MultiTherm IG-4 is an upgrade of, and a direct replacement for MultiTherm IG-2®
-
Operating range from 10°F (-12°C) to 550°F (288°C)
-
Economical heat transfer fluid
-
High flash point
-
Non-Toxic, Non-Hazardous
-
Designed for applications in Asphalt, Roofing, Paper, Particle Board and Die-Casting
-
Thermal expansion coefficient 0.00054/°F (0.00098/°C)
-
Operating range from 10°F (-12°C) to 550°F (288°C)
-
Economical heat transfer fluid
-
High flash point
-
Non-Toxic, Non-Hazardous
-
Designed for applications in Asphalt, Roofing, Paper, Particle Board and Die-Casting
-
Thermal expansion coefficient 0.00054/°F (0.00098/°C)
-
When you have heating and cooling in the same loop
-
Operation range: from 50°F (-10°C) to 500°F (260°C)
-
Meets FDA specifications but not certified
-
Very low viscosity - Very low pour point - Low vapor pressure
-
Relatively high flash point - Non-Toxic, Non-Hazardous
-
Designed for applications in Plastics, Chemical, and other processing industries
-
Thermal expansion coefficient 0.00051/°F (0.00092/°C)
-
For use in closed loop, liquid phase heating and cooling systems from 10°F to 500°F
Low Temperature Applications
MultiTherm ULT-170®
-
For ultra low temperature applications
-
Operation range down to -170°F (-112°C)
-
Low freezing point - Low viscosity at ultra-low temperatures
-
Thermally stable & biodegradable
-
Single fluid usage for sterilization applications
-
Designed for Pharmaceutical, Chemical, Freeze-Drying, and Cryogenic applications
-
Extends low-end operating ranges far beyond the boundaries of most competitive brands
-
Remains pumpable even at temperatures below -170°F (-112°C)
- For mid to low temperature range applications
- Operation range down to -112°F (-80°C)
- High flash point - Non-Toxic
- Designed for Food & Beverage, Pharmaceutical, and refrigeration applications
- Used when heat transfer fluid requirements demand both low toxicity and an elevated flash point
- Aqueous-based for Low temperature applications
- Operation range down to -58°F (-50°C)
- Non-toxic, None-flammable
- Designed for Ice Rink, Food, Refrigeration, Breweries/Distilleries, and HVAC applications
- Engineered to deliver the desirable low-end temperature performance of synthetic organic and silicone-based fluids
