One Point Ionizer From HAUG North America

The One-Point-Ionizer OPI was developed for the neutralization of smallest parts. Emitting positive and negative ions, this unit neutralizes reliably spot charges. This ionizer is perfectly suited for mounting in places where there is little room.

The plug of the electrode must simply be connected to the high voltage transformer (power pack) and the unit can be quickly set into operation without tools.

The One-Point-Ionizer OPI has proven its value repeatedly in daily use.
The OPI can also be equipped with compressed air (Mini-Jet Ionisator).

Attention: The pin carries high voltage and must not be touched while in operation.

Cleaning and Maintenance

We recommend regular cleaning of the electrode as dirt may cause considerable loss of efficiency.

The regular use of the HAUG special cleaning agent SRM 1 and of the cleaning system RS 1 guarantee constant efficiency of the ionizing unit.

one_point

Technical Data_table el_class=”tech_table text_left”]
Types OPI inseparable HV-cable,
attached permanently to the bar.
Order-No.: 03.8510.000
Dimensions per Segment 16 mm
Length 45 mm
Operating temperature +5°C to +50°C
Storage/transport temperature -15°C to +60°C
Optimum effective distance 30 mm
Smallest bending radius (cable) R 50

Subject to technical changes![/mk_table]

Technical Illustration:

one_point_2

[mk_Accessories_table el_class=”tech_table text_left”]
Holder, with plate Order-No.: 10.7207.002
[/mk_table]

Suitable Power Packs_table el_class=”tech_table text_left”]
Connectable lengths
(ionizing unit incl.
high-voltage cable)
EN SL max. 5 m
EN SL LC / EN SL RLC max. 10 m
EN 8 / EN 8 LC max. 18 m
Multistat max. 18 m
EN 70 / EN 70 LC max. 2 x 18 m
[/mk_table]
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt