High Voltage Charging Generator HAUG AG 25
The charging generator AG 25 is equipped with one high-voltage connection (DC). The electronic voltage adjustment is stepless, and there is a choice of analog or digital display integrated into the unit for the output voltage. This unit has been tested and proven thousands of times. It is suitable for all common applications.
HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.
All HAUG charging generators are available with positive or negative polarity.
HAUG charging systems can be used, among others, in the following applications:
- for fixing and positioning films and foils, paper and cardboard, e.g. on steel sheets, glass panels, wood panels or similar;
- for fixing films and foils on packaging machines / film welding machines;
- for fixing films and foils on turrent film winders, for fixing the wound film against telescoping and glue-less commencement of the film winding process on cardboard tubes.
Technical Data AG 30
|Dimensions||390 x 280 x 210 mm (L x B x H)|
|Protection Type||IP 54|
|Supply voltage||115 VAC / 230 VAC (50 – 60 Hz)|
|Power consumption||approx. 60 VA|
|approx. 40 kVDC|
|Short-circuit output current
|(lk) ≤ 4,5 mA|
|Capacity of signaling contacts||(24 VAC / 35 VDC; max. 50 mA|
|Pulse frequency via pulse input||max 1 Hz (max. 106 Zyklen)|
|Operating temperature||+5 °C to +45 °C|
|Storage/transport temperature||-15 °C to +60 °C|
|Mains cable||2,6 m; fixed to the device|
Subject to technical changes!
Accessories AG 30
|Round plug||Order-No.: X-0616|
|Angled plug||Order-No.: X-5718|
|Signaling cable K1,
shielded, incl. round plug
|5 m||Order-No.: 06.8941.000|
|10 m||Order-No.: 06.8941.001|
|20 m||Order-No.: 06.8941.002|