Stainless Steel Air Guns Spot Cooling System

Sub-freezing air for dry machining and spot cooling industrial processes - reliable, non-toxic, non-polluting, no residue, low cost.

Stainless Steel Air Guns - Spot Cooling System
A ready-to-use, portable cold-air source

 

Stainless, Steel, Air Guns, Spot Cooling, System Stainless Steel Air Guns - Spot Cooling System are your portable cold-air source for improving dry machining operations or spot-cooling a wide range of industrial processes.


Using only compressed air, the Stainless Steel Air Guns - Spot Cooling System produce a stream of cold air 80 °F (45 °C) below your compressed air temperature.


It's clean, convenient-put the gun where you need it, using the magnetic base-aim the cold air stream onto your work with the flexible hose-go to work!


The Stainless Steel Air Guns - Spot Cooling System are heavy-duty, built for the rigors of factory-floor service. Made of heavy-gauge stainless steel, they are precision-machined, assembled and tested under strict quality control. They will never pit or rust when subjected to coolants, water, or other corrosive materials.


The tool saver


  • Air-cooled dry machining for metals, composites, plastic, rubber, wood
  • Perfect for tapping operations
  • Ideal for tool-room cutter grinders or production milling, drilling, grinding, or tapping
  • Increase feeds, speeds and quality
  • Eliminates liquid coolant cost, contamination, skin irritation, mess on walls, floors, machines
  • Finishes the job with a clean, dry part
  • Improves tool life, production rates, finish, tolerances
  • Eliminates microcracking and burning
  • Reduces wheel loading and dressing

Spot Cooling System


  • No liquids, ozone-depleting chemicals, or residue
  • Cool solders, hot melts, adhesives
  • Thermo-test electronic components, circuit boards and thermostats
  • Shrink-fit parts
  • Cool mold tooling, ultrasonic devices
  • Cool needles to prevent thread breakage and heat cracking of synthetic threads

Stainless Steel Air Guns

produces temperatures approximately 80 °F (45 °C) below your compressed air temperature, providing residue-free, subfreezing air for dry machining or spot cooling industrial processes, tests, etc.
Several models to fit any job requirement.
 
Stainless, Steel, Air Guns, Spot Cooling, System
60015 at work

Ready-to-use

 

  • Just plug in air line, aim it,go to work
  • Instant on/off
  • Muffled for quiet, efficient operation
  • Maintenance-free, no moving parts
  • Lightweight, low-cost
  • Uses standard factory air, 80-100 PSIG, with variable flows of 10, 15, 25, & 35 SCFM, up to 2500 Btu/H cooling
    • Stainless, Steel, Air Guns, Spot Cooling, System
    Compact Air Gun

    Descriptions of ARTX Stainless Steel Air Guns Models

    Stainless, Steel, Air Guns, Spot Cooling, System
    Model 60015
    Stainless Steel Air Guns
    Model Description
    60015 Stainless Air Gun with magnetic base, Snap-Flex Hose and generators (4)
    60040 Stainless Air Gun with magnetic base, Snap-Flex Hose and generator (4) and 5 micron filter
    90601 Y dual point application hose
    Stainless, Steel, Air Guns, Spot Cooling, System
    Model 60051
    Adjustable Stainless
    Steel Air Guns
    same wide range of temperatures and flow as the 60015 but with adjustable cold air flow and temperature range with each generator
    Model Description
    60050 Adjustable Stainless Steel Air Gun kit with magnetic base, 12" Snap-Flex Hose, generators(4), 5 micron air line filter
    60051 Adjustable Stainless Steel Air Gun with magnetic base, 12" Snap-Flex Hose, generators (4)
    Stainless, Steel, Air Guns, Spot Cooling, System
    Model 60061
    Adjustable Stainless
    Low Flow Air Guns
    smaller size with adjustable flows and temperature range of the 10 and 15 cfm generator
    Model Description
    60060 Adjustable Air Gun with magnetic base, 5 micron air filter, dual point hose, 10 and 15 cfm generators
    60061 Stainless Steel adjustable Air Gun with magnetic base, dual point hose, 10 and 15 cfm generators
    Stainless, Steel, Air Guns, Spot Cooling, System
    Stainless, Steel, Air Guns, Spot Cooling, System
    Model 60071
    Sewing Cooler
    small size and a miser on compressed air, 75°F drop in compressed air temperature
    Model Description
    60070 Kit includes: 8 cfm sewing cooler, Snap-Flex Hose, filter regulator with gauge, magnetic base
    60071 8 cfm sewing cooler, Snap-Flex Hose, magnetic base

    Stainless Steel Air Guns Spot Cooling System Dry Machining Case History

    Stainless Steel Air Guns Spot Cooling System Application


    Request More Information »

     


    Site Designed by Panther Marketing & Design