Air Jets Blow Off System

Don't buy another compressor...change over to ARTX™ Air Jets Blow Off System...cut noise and energy too!

Air, Jets, Blow, Off, SystemHeavy blow-off and air conveying jobs can overwork your compressor and shorten the time between expensive overhauls. A 1/4" (6mm) air tube uses the entire output of a 10-hp compressor, sending energy costs out of sight, hitting 100 dBA noise levels, and violating OSHA dead-end air pressure limits. Air Jets Blow Off System gives you an edge with air amplification. Safer and quieter, they amplify compressed air flows four times, delivering high thrust with a fraction of the air used by open air lines. Plant-wide changeover to ARTX Air Jets Blow Off System is like adding compressor capacity. They'll:

 

  • cut your energy bill
  • increase air flow with lower noise level
  • reduce demand on your compressor
  • give you a return on investment in weeks, if not days.


How do High-Thrust Air Jets Blow Off System work?

Air Jets Blow Off System High-Thrust Jets release a tiny amount of compressed air at near-sonic velocity through a fine, internal, ring-shaped nozzle. The high-speed "tube" of air ejected through the front creates a strong vacuum behind itself, pulling additional surrounding air through the rear of the jet, while pushing the ambient air in front.

Two models of Air Jets Blow Off System: adjustable unit for easy set-up, with air conveying capability

Our Adjustable High-Thrust Air Jets Blow Off System simplifies set-up or system change because you can alter the flow and thrust with a quick twist of the nozzle. Just install it on your air line and set it to do the job.

The In-Line Air Jets Blow Off System are ideal for retrofitting open air line blowoff applications where system set-up does not change frequently. It can also air convey fine granular product, with a 3/4" (19mm) diameter inlet for attachment of tubing. It develops 54" W.C. suction and 5.6 oz. (150 gm) thrust with 80 PSIG (5 BAR) air.

Air, Jets, Blow, Off, System

Dimensions for Air Jets Blow Off System Model 38038

Air, Jets, Blow, Off, System

Dimensions for Air Jets Blow Off System Model 38044

 

Advantages

  • Low initial and operating costs
  • Meet OSHA noise and dead-end pressure requirements
  • Easy to control flow/force
  • Instant on/off
  • No maintenance, no moving parts
  • No electricity or explosion hazard
  • No RF/EMI interference
  • No vibration
  • Solid brass construction

Uses

  • Ejecting parts from molding machines and stamping presses
  • Blow-off of chips, trim scrap, swarf
  • Air conveying dusts, powders and fibers
  • Part cleaning before painting
  • Cooling extruded parts
  • Cleaning/cooling of metal strip and plastic/paper webs
  • Cleaning/cooling of conveyors and conveyorized parts

Air, Jets, Blow, Off, System

Flow Pattern for Air Jets Blow Off System Models 38038-44

Advantages of Air Saver High-Thrust Wedge Jet
(More Information)

  • 25:1 Air Amplification
  • Low initial and operating costs
  • Highest thrust of any blow-off nozzle
  • Reduce compressed air costs by 30%
  • Easy to control flow/force
  • Instant on/off
  • No maintenace, no moving parts
  • No electricity or explosion hazard
  • No RF/EMI interference
  • No vibration
  • Reduces noise levels of open air lines by 30 dBA
  • Provides wide blow-off for stamping, sand blasting, drying, and parts ejection
  • Manifolds available for Model 38050 series
Air, Jets, Blow, Off, System
Air, Jets, Blow, Off, System

Application Ideas for Air Saver High Thrust Air Jets Blow Off System

Request More Information »

 


Site Designed by Panther Marketing & Design