Belt Type Oil Skimmers



Photo shows
stainless steel
belt and fixed tall
pulley design.



Photo shows
polyurethane belt
with fixed tail
pulley design.
Belt Type Oil Skimmers
for use with....
  • Metalworking Coolants
  • Parts Washer Fluids
  • Wastewaters
  • Pressure Spray water
  • Water Treatment Systems

Mini-skimmers have been in use throughout the world since 1990. Thousands are used daily to remove unwanted floating "tramp" oils.

They are small, run very quietly, and use a very dependable permanent magnet motor! Standard models for industrial users include oil pickup rate to 1 gallon/hour, loose or fixed tail pulley design, and a choice of polyurethane (for coolants & oil/water) or stainless steel(for parts washing) belts in four standard length sizes.

Special skimmers with other options such as special belt lengths (to 100 ft.), two belts, stainless motor covers, etc. are available.

Model MSB Mini-Skimmer fited for a 2" mounting well. PVC pipe show on "demo model is 2" I.D. fitted with a 1" wide stainless steel belt.

Belts can reach as far down as 50 ft. They are equipped with spcial small tail pulley and weight bar.


FEATURES AND CHOICES!

  • Lifts 1 quart to 4 gallons per hour!
  • Polyurethane belts for coolants!
  • Stainlesss steel belts for partswashers!
  • Four standard belt lengths!
  • Special belt lengths to 100 ft!
  • Fixed tail pulley systems!
  • Mounts on verical/horizontal surfaces!
  • World's smallest! Fits into tiny spaces!
  • Dependable permanent magnet motor!
  • Steel or stainless wetted parts!
OIL LIFT RATES

RPM 1 Belt
10 RPM 1 Qt/hr
30 RPM 1 Gal/hr

Oil pickup rates will vary depending on oil type, temp, viscosity and other factors. Use chart for approx. max. rates.

SPECIAL BELT LENGTHS
Any length is available up to 100 ft from mounting bracket base.


INFORMATION NEEDED TO SELECT PROPER SKIMMER
Due to the many choices available, space does not permit listing all of the standard Model Numbers. Kindly provide the following information and your distributor or Wayne Products will provide a Model Number for you.

Application Information: Coolant Parts Washer Use-or other. Advise temperature and PH.
Belt Length Required: Distance from mounting point to lowest liquid level plus 2".
Oil Lift Rate: In quarts per hour.
Tall Pulley Support: Loose with retainer chain or Fixed with bar.
Wetted Parts: Steel is less expensive. Stainless is available
Accessories: MSB-A systems sold by distributors and Wayne Products all include handle, timer, ground fault interrupter, 2 ft. hose through extension, mounting fasteners, and instructions.

BELT LENGTH
"x" length indicates the distance from the mounting braket base to the lowest point. Lineal length is the belt circumference.

Belt# "x" Lineal
270 8" 27"
360 12" 36"
480 18" 48"
600 24" 60"

Above are standard lengths. Other lengths are available!



Quotation Request
  Name
*Required information
  Title
*Required information
  Company
*Required information
  Address
*Required information
  Address (cont.)
  City
*Required information
  Province/State
*Required information
  Postal/Zip Code
*Required information
  Country
*Required information
  Telephone
  (Include Area Code)
*Required information
  Fax
  (Include Area Code)
  E-mail
*Required information
  URL
  Application: Parts Washer 
Coolant
Waste Water
  Highest Temp. ºF?
  pH?
  Project: Current
Near Future
Information Only
  Quantity One
enter amount if more than one
  Power 115/1/60 (std)
Other: Describe

6 ft.cordset (std) with plug
Cord only (length ft)
  Oil Collection Rate: Quarts per hour
Gallons per hour
  Use: Hours per day
Continuous
  Belt Reach: Advise distance from skimmer mounting base to 3" below the lowest liquid level.
inches
feet
  Mounting: Edge of open tank
Top of closed tank
Other: Describe
  Comments: Please advise any other matters thant may be helpful.

 


 


Site Designed by Panther Marketing & Design