EN,8,LC,Power,Pack,Haug,North,America

EN 8 LC Power Pack From Haug North America

Tech Sales Home
Haug North America
Discharge Systems
Air Blowers
Air Gun
Static Blow-Off Systems
Hazardous Area Ionizing Devices
Charging Systems
Static Measuring & Testing Systems
EN 8 LC Power Pack

Areas

Features/Advantages

Configurations

EN 8 LC Data

Specifications

Technical illustration

HAUG EN 8 LC Power Pack

The EN 8 LC Power Pack supplies voltage to ionizers. The mains voltage is transformed into a 7000 - 8000 volt alternating current by a high voltage transformer.
The EN 8 LC Power Pack represents the state of the art.

The monitoring which is integrated in the secondary area indicates that the partial discharge inception voltage 
(= start of effect of ionization units / figure 1) 
is too low by making the monitoring LED blink. The compact printed circuit board technology ensures reliability and ease of maintenance
. 
The device has four gas-tight high voltage connections and has been manufactured in accordance with protection type IP54, protection class I as per DIN 0550.



Corona inception voltage 
(point at which ionizing 
units become effective)

Flashing LED:

     
Special features and advantages of EN 8 LC  Power Pack:

simple and fast checking of ionization unit
reliable information concerning manufacturing process
   (process and quality control)
continuous monitoring of the ionization unit without 
   additional testing and measuring equipment.
 
Areas (EN 8 LC Power Pack):

Plastic processing industry:
   Film extruders, film processing. In the manufacture of 
   plastic tubes, sections, shells and rods and in plastic  extruders.
Packing industry:
   Packing machines, filling machines and bag manufacture.
Graphics industry:
   Folding machines, print processing
Electrical industry:
   printed circuit board manufacture
 


Possible EN 8 LC configurations:
 
EN 8 LC Power Pack   + VS ionizing bar
or + VSA ionizing bar
  + RN ionizing bar
  + Ring electrodes

We would be pleased to provide other configurations on request.
 

 
EN 8 LC Data:

230 V, 4 HT-connections;  Order-No.: 01.7757.100
115 V, 4 HT-connections;  Order-No.: 01.7756.100 

 


Specifications: EN 8 LC Power Pack

Nominal input voltage:
115 V~ / 230 V~/ 24 V~
Nominal output voltage: approx. 7 - 8 kV~ 
Output short circuit current:  (Ik) < 5 mA
Power consumption:  approx. 50 VA
Protection type: IP 54
Maximum load : 15 m (HV cable incl. ionizer)
Nominal frequency: 50 - 60 Hz
Mains cable length : approx. 2 m
Weight: approx. 5 kg
Max. ambient temperature:  approx. +50 °C

We reserve the right to effect technical modifications! 

 

Technical illustration: EN 8 LC Power Pack
a
   





HAUG North America
1200 AEROWOOD DR UNITS 14 & 15
MISSISSAUGA ON L4W 2S7
TEL: 905 206-9701 FAX: 905 206-0859

Site Designed And Maintained By Panther Marketing & Design